The AWK-1137C is an ideal client solution for industrial wireless mobile applications. It enables WLAN connections for both Ethernet and serial devices, and is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The AWK-1137C can operate on either the 2.4 or 5 GHz bands, and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.
Input/Output Interface | |
WLAN Standards | 802.11a/b/g/n 802.11i Wireless Security |
Modulation Type | DSSS OFDM MIMO-OFDM |
Frequency Band for US (20 MHz operating channels) | 2.412 to 2.462 GHz (11 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) 5.500 to 5.700 GHz (11 channels) 5.745 to 5.825 GHz (5 channels) |
Frequency Band for EU (20 MHz operating channels) | 2.412 to 2.472 GHz (13 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) 5.500 to 5.700 GHz (11 channels) |
Frequency Band for JP (20 MHz operating channels) | 2.412 to 2.484 GHz (14 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) 5.500 to 5.700 GHz (11 channels) |
Wireless Security | WEP encryption (64-bit and 128-bit) WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES) WPA/WPA2-Personal |
Transmission Rate | 802.11b: 1 to 11 Mbps 802.11a/g: 6 to 54 Mbps 802.11n: 6.5 to 300 Mbps |
Transmitter Power for 802.11a | 23±1.5 dBm @ 6 to 24 Mbps 21±1.5 dBm @ 36 Mbps 20±1.5 dBm @ 48 Mbps 18±1.5 dBm @ 54 Mbps |
Transmitter Power for 802.11n (5 GHz) | 23±1.5 dBm @ MCS0/8 20 MHz 18±1.5 dBm @ MCS7/15 20 MHz 23±1.5 dBm @ MCS0/8 40 MHz 18±1.5 dBm @ MCS7/15 40 MHz |
Transmitter Power for 802.11b | 26±1.5 dBm @ 1 Mbps 26±1.5 dBm @ 2 Mbps 26±1.5 dBm @ 5.5 Mbps 25±1.5 dBm @ 11 Mbps |
Transmitter Power for 802.11g | 23±1.5 dBm @ 6 to 24 Mbps 22±1.5 dBm @ 36 Mbps 20±1.5 dBm @ 48 Mbps 19±1.5 dBm @ 54 Mbps |
Transmitter Power for 802.11n (2.4 GHz) | 23±1.5 dBm @ MCS0/8 20 MHz 17±1.5 dBm @ MCS7/15 20 MHz 23±1.5 dBm @ MCS0/8 40 MHz 17±1.5 dBm @ MCS7/15 40 MHz |
Receiver Sensitivity for 802.11a (measured at 5.680 GHz) | Typ. -90 @ 6 Mbps Typ. -88 @ 9 Mbps Typ. -87 @ 12 Mbps Typ. -85 @ 18 Mbps Typ. -81 @ 24 Mbps Typ. -78 @ 36 Mbps Typ. -74 @ 48 Mbps Typ. -73 @ 54 Mbps |
Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz) | Typ. -69 dBm @ MCS7 20 MHz Typ. -70 dBm @ MCS15 20 MHz Typ. -64 dBm @ MCS7 40 MHz Typ. -66 dBm @ MCS15 40 MHz |
Receiver Sensitivity for 802.11b (measured at 2.437 GHz) | Typ. -89 dBm @ 1 Mbps Typ. -89 dBm @ 2 Mbps Typ. -89 dBm @ 5.5 Mbps Typ. -88 dBm @ 11 Mbps |
Receiver Sensitivity for 802.11g (measured at 2.437 GHz) | Typ. -88 dBm @ 6 Mbps Typ. -88 dBm @ 9 Mbps Typ. -88 dBm @ 12 Mbps Typ. -87 dBm @ 18 Mbps Typ. -84 dBm @ 24 Mbps Typ. -81 dBm @ 36 Mbps Typ. -77 dBm @ 48 Mbps Typ. -75 dBm @ 54 Mbps |
Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz) | Typ. -70 dBm @ MCS7 20 MHz Typ. -70 dBm @ MCS15 20 MHz Typ. -64 dBm @ MCS7 40 MHz Typ. -65 dBm @ MCS15 40 MHz |
WLAN Operation Mode | Client, Client-Router, Slave, Sniffer |
Antenna | External, 2/2 dBi, Omni-directional |
Antenna Connectors | 2 RP-SMA female |
Ethernet Interface | |
10/100BaseT(X) Ports (RJ45 connector) | 2 |
Standards | IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.1Q for VLAN Tagging |
Ethernet Software Features | |
Management | DHCP Server/Client, HTTP, IPv4, LLDP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, Proxy ARP, VLAN, Wireless Search Utility, MXview, MXconfig |
Routing | Port forwarding, Static Route, NAT |
Security | HTTPS/SSL, RADIUS, SSH |
Time Management | NTP Client, SNTP Client |
Firewall | |
Filter | ICMP, MAC address, IP protocol, Port-based |
Serial Interface | |
Connector | DB9 male |
Serial Standards | RS-232, RS-422/485, RS-232/422/485 |
Operation Modes | Disabled, Real COM, RFC2217, TCP Client, TCP Server, UDP |
Data Bits | 5, 6, 7, 8 |
Stop Bits | 1, 1.5, 2 |
Parity | None, Even, Odd, Space, Mark |
Flow Control | None, RTS/CTS, XON/XOFF |
Baudrate | 75 bps to 921.6 kbps |
Serial Data Log | 256 KB |
Serial Signals | |
RS-232 | TxD, RxD, RTS, CTS, DCD, GND, DTR, DSR |
RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-2w | Data+, Data-, GND |
RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
LED Interface | |
LED Indicators | SYS, LAN1, LAN2, WLAN, Serial |
Input/Output Interface | |
Buttons | Reset button |
Physical Characteristics | |
Housing | Metal |
IP Rating | IP30 |
Dimensions | 77.1 x 115.5 x 26 mm (3.04 x 4.55 x 1.02 in) |
Weight | 470 g (1.03 lb) |
Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Power Parameters | |
Input Voltage | 9 to 30 VDC |
Power Connector | 1 removable 3-contact terminal block(s) |
Power Consumption | 11.7 W (max.) |
Reverse Polarity Protection | Supported |
Environmental Limits | |
Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature (package included) | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
EMC | EN 61000-6-2/-6-4, EN 55032/24 |
EMI | CISPR 22, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF |
Radio | EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-1137C, ANATEL, MIC, NCC, SRRC, WPC, KC, RCM |
Road Vehicles | E mark E1 |
Safety | EN 60950-1, UL 60950-1 |
Vibration | IEC 60068-2-6 |
MTBF | |
Time | 1,125,942 hrs |
Standards | Telcordia SR332 |
Warranty | |
Warranty Period | 5 years |
Details | See www.moxa.com/warranty |
Name | Type | Version | Release Date | |
Datasheet for AWK-1137C Series | Datasheet | V1.7 | 11 March 2020 |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/english/productview.php on line 615