Part of the ADDERLink™ INFINITY range, the ADDERLink™ INFINITY Dual 2020 is a high performance KVM solution that enables you to isolate critical computing hardware in a secure and temperature controlled environment. Configurable as a single link or dual head, this extender provides an ‘at-the-PC’ experience across up to 10km: the digital video you receive is the same as the digital video leaving the remote computer, with no loss of compression and minimal lag. The Dual 2020 comes with a choice of single mode or multimode fiber modules to suit your specific application. This KVM extender can be used as a point to point extender or can be integrated into a wider matrix system when combined with the ADDERLink INFINITY Manager (A.I.M.).
Video Resolutions
Single Link DVI-D resolutions to a maximum of 1920 x 1200 @ 60Hz
Approvals / Compliance
Standards
Supports USB2.0 devices (low, full and high speed). Security feature allows the blocking of non HID devices. Isochronous devices are not supported (e.g. USB audio or video devices)
Cable Requirements
Copper (CATx up to 100m/330ft) or fiber (requirements dependent)
Environmental
0 to 40 deg C / 32 to 104 deg F
Connectors – Local Unit
DVI-D x 2, Audio 3.5mm in, Audio 3.5mm out, USB type B, RS232 9 pin D-Type, SFP slot
Connectors – Remote Unit
Video: DVI-D x 2, Audio 3.5mm in, Audio 3.5mm out, USB type A x 4, RS232 9 pin D-Type, SFP slot
Mechanical
1U compact case, robust metal construction. 198mm/7.92” (w), 44mm/1.76” (h), 150mm/6” (d), 1.1kg/2.7lbs
Power
2.5mm DC jack (power adapter included),100-240VAC 50/60Hz, 0.4A, input to power adapter, 5VDC 12.5W output from power adapter
Software
All known operating systems
Name | Type | Version | Release Date | |
ADDERLink™ INFINITY Dual 2020 | Datasheet | 1.0 | 12 January 2021 | |
ADDERLink™ INFINITY Dual 2020 | Manual | 1.0 | 12 January 2021 |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/english/productview.php on line 615