TEL. & FAX +66(0)2-020-3301
 |
 |
 |
 |
The IMBA-Q170A supports RAID 0/1/5/10, enabling higher storage volumes and facilitating faster data transferability and transmission, allowing the user to enjoy smoother overall performance whilst eliminating bottlenecks.
A Temperature Monitor is available on the CPU/Chassis, along with a Fan Monitor and a Voltage Monitor, supporting an output of Vcore/5V/3.3V/12V. Powered with an Intel® HD Graphics chipset, support for VGA output is provided at 60Hz/1920 x 1200. The IMBA-Q170A provides 3 independent displays. As such, the board is naturally ideal for uses in digital signage.
| SYSTEM | |
| PROCESSOR | Intel® 7th/ 6th Generation(Kaby Lake-S/ Skylake-S) Core™ i7/i5/i3/Pentium®/ Celeron® 14nm LGA1151 Socket Processor |
| CHIPSET | Intel® Q170 |
| MEMORY | 288-pin DIMM x 4, max. 64GB, DDR4 2400/2133/1867, Dual-channel |
| I/O CHIPSET | NCT6791D, F81216HD |
| ETHERNET | LAN1: Intel® PHY I219LM Gb LAN (supports iAMT 11.0), LAN2: Intel® I211AT Gb LAN |
| AUDIO | Realtek® ALC887 (Colay with ALC886) |
| TPM | Nuvoton NPCT6xx TPM2.0 (Optional) |
| EXPANSION SLOT | SKU1: PCIe [x16] x 1, PCIe [x4] (open edge) x 2, PCI x 3, M.2 E key (22 x 30mm) x 1, M.2 M key (22 x 80mm, for SATA) x 1 SKU2: PCIe [x16] x 1, PCIe [x4] (open edge) x 1, PCI x 3, M.2 E key x 1, M.2 M key (for SATA & PCIex4) x 1 |
| BIOS | 128M bit Flash ROM x 1, AMI BIOS |
| H/W MONITOR | Temperature Monitor on CPU/Chassis, Voltage Monitor on Vcore/5V/3.3V/12V, Fan Monitor on CPU/Chassis |
| WATCHDOG TIMER | 1~255 steps by software program |
| SMART FAN CONTROL | CPU Fan x1, Chassis Fan x 2 |
| WAKE ON LAN/ PXE | Yes (WOL/PXE) |
| POWER STATE | S3, S4, S5 |
| GRAPHICS | |
| GRAPHICS CHIPSET | Intel® HD Graphics |
| GRAPHICS MULTI DISPLAY | VGA+HDMI, HDMI+HDMI, VGA+HDMI+HDMI |
| VGA | Up to 1920 x 1200 @60Hz |
| DVI | — |
| HDMI | HDMI 1.4 up to 4096 x 2304 @24Hz |
| DISPLAYPORT | — |
| LVDS | — |
| BACKLIGHT CONTROL | — |
| ENVIRONMENTAL & POWER & ME | |
| BATTERY | Lithium battery |
| POWER REQUIREMENT | 24-pin ATX connector x 1, 8-pin ATX 12V Power connector x 1 |
| OPERATING TEMPERATURE | 32°F ~ 140°F (0°C ~ 60°C) |
| STORAGE TEMPERATURE | -40°F ~ 185°F (-40°C ~ 85°C) |
| OPERATING HUMIDITY | 0% ~ 90% RH, non-condensing |
| CERTIFICATION | CE & FCC Class A |
| FORM FACTOR | ATX, 12" x 9.6" (305 mm x 244 mm) |
| WEIGHT | 1.76 lb (0.8 Kg) |
| MTBF (HOURS) | 219970 |
| REAR PANEL I/O PORTS | |
| USB | USB 3.2 Gen 1 x 10 |
| DISPLAY I/O | HDMI x 2, VGA x 1 |
| AUDIO I/O | Line-in, Mic-in, Line-out |
| LAN I/O | RJ-45 x 2 |
| SERIAL PORT | DB-9 COM x 1 (supports RS-232/422/485, 5V/12V/RI) |
| PS/2 PORT | Stack Port (Keyboard & Mouse) x 1 |
| INTERNAL I/O CONNECTORS | |
| STORAGE | Supports RAID 0/1/5/10 SKU1: SATA 6.0Gb/s x 3, M.2 M key (SATA) x 1 SKU2: SATA 6.0Gb/s x 4, M.2 M key (PCIex4) x 1 |
| USB | USB 2.0 x 3 |
| DISPLAY I/O | — |
| SERIAL PORT | RS-232 header x 5 |
| PARALLEL PORT | — |
| DIO | 8-bit DIO x 1 (In/Out programmable) |
| FAN | 4-pin CPU Fan x 1, 4-pin Chassis Fan x 2 |
| POWER | — |
| OTHERS | Front panel header x 1, Clear CMOS jumper x 1, BIOS flash header (2[x4]P p=1.27mm) x 1, Chassis Intrusion x 1, AT/ATX mode select jumper x 1 |
| OS | |
| OS SUPPORT | Windows® 7 32/64-bit (not supported when a Kaby Lake processor is used) Windows® 8.1 64-bit (not supported when a Kaby Lake processor is used) Windows® 10 64-bit Linux Fedora 64bit |
| Name | Type | Version | Release Date | |
| IMBA-Q170A Datasheet | Datasheet | V2.0 | 02 September 2020 |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/english/productview.php on line 615
