Login   |  
Notice: Undefined index: basket in /opt/lampp/htdocs/english/menutop.php on line 14
(0)   |  

TEL. & FAX +66(0)2-020-3301

MiiNePort E2 Series

Home  >   MOXA  >   Industrial Edge Connectivity  >  
Serial Device Servers  >   Serial Embedded Modules

10/100 Mbps embedded pin header module serial device servers

Product Feature

  • Smallest embedded device server available—only 29 x 17 x 12.6 mm
  • Supports EZPower for 3.3 to 5 VDC system power input
  • Green design with extremely low power consumption
  • Uses Moxa’s high-quality and reliable second-generation MiiNe SoC
  • MiiNePort NetEZ technology makes integration incredibly easy
  • Operation versatility with Real COM/TCP/UDP/RFC2217/MCSC

Introduction

Moxa’s MiiNePort E2 Series embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices with minimal integration effort. The MiiNePort E2 is empowered by the MiiNe, Moxa’s second-generation SoC, which supports 10/100 Mbps Ethernet, delivers a serial baudrate of up to 921.6 kbps, offers a versatile selection of ready-to-use operation modes, and requires a minimal amount of power. With Moxa's innovative NetEZ technology, the MiiNePort E2 can convert any device with a standard serial interface to an Ethernet-enabled device. In addition, the MiiNePort E2 is the smallest embedded device server without an RJ45 connector, making it easy to fit into virtually any existing serial device.

 

Moxa’s Second-generation SoC

  • The MiiNe was created to provide manufacturers with a competitive embedded serial-to-Ethernet solution. The MiiNePort E2, which uses the MiiNe for its SoC, is one of the world’s tiniest embedded device servers and has the lowest power consumption among similar products. The MiiNe’s features include:
  • Cost-effective serial-to-Ethernet conversions
  • Arm core
  • Advanced UART technology
  • Internal 2 MB Flash and 4 MB SDRAM memory

Embedded System

CPU32-bit Arm Core

Memory

Flash2 MB
SDRAM4 MB

Input/Output Interface

Configurable DIO Channels (by
software)
4

Ethernet Interface

10/100BaseT(X) Ports, Auto
MDI/MDI-X
4-pin pin header
Magnetic Isolation Protection1.5 kV (built-in)

Ethernet Software Features

Configuration OptionsWeb Console (HTTP), Windows Utility
ManagementARP, BOOTP, Device Search Utility (DSU), DHCP Client, IPv4, SMTP,
SNMPv1, TCP/IP, Telnet, TFTP, UDP, ICMP
Windows Real COM DriversWindows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10
(x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded
CE 5.0/6.0, Windows XP Embedded
Linux Real TTY DriversKernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
Fixed TTY DriversSCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10,
FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Android APIAndroid 3.1.x and later

Serial Interface

No. of Ports1
Serial StandardsTTL
Operation ModesMiiNePort E1 Series: Real COM mode, RFC2217 mode, TCP Client mode,
TCP Server mode, UDP mode
MiiNePort E1-SDK: Real COM mode, Ethernet Modem mode
BaudrateMiiNePort E1 Series: 50 bps to 230.4 kbps
MiiNePort E1-H/-SDK Series: 50 bps to 921.6 kbps
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlNone, RTS/CTS, XON/XOFF

Serial Signals

TTL• TxD, RxD, RTS, CTS, RST (reset circuit), GND

NetEZ Technology

NetEZ FunctionsExTrigger, SCM (Serial Command Mode), AutoCFG, MCSC (Multi-Channel
Serial Communication)

Serial Software Features

Serial to Ethernet Sample Source
Code
MiiNePort E1-SDK (Integrated in MiiNePort-IDE):
1. TCP Server Echo
2. TCP Server to Serial (Single connection)
3. TCP Server to Serial (Multi-connection)
4. TCP Client Echo
5. TCP Client to Serial (Startup)
6. TCP Client to Serial (Any character)
7. TCP Client to Serial (Designed destination TCP/IP port from serial)
8. UDP Echo
9. UDP to Serial

Power Parameters

Input Current157 mA @ 3.3 VDC
Input Voltage3.3 to 5 VDC

Physical Characteristics

DimensionsMiiNePort E2/E2-H/E2-SDK Series: 29 x 17 x 12.6 mm (1.14 x 0.67 x
0.50 in)
WeightMiiNePort E2/E2-H Series: 5 g (0.01 lb)
MiiNePort E2-ST/E2-H-ST/E2-SDK: 77 g (0.17 lb)
Form Factor TypeDrop-in modules

Environmental Limits

Operating TemperatureStandard models: 0 to 55˚C (32 to 131˚F)
Wide Temp. models: -40 to 85˚C (-40 to 185˚F)
Storage Temperature (package
included)
-40 to 60°C (-40 to 140°F)
Ambient Relative Humidity5 to 95% (non-condensing)

Standards and Certifications

EMSIEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 0.5 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
Environmental TestingIEC 60068-2-1
IEC 60068-2-3
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class B
ShockIEC 60068-2-27
VibrationIEC 60068-2-6

Declaration

Green ProductRoHS, CRoHS, WEEE

MTBF

Time5,696,350 hrs
StandardsTelcordia SR332

Warranty

Warranty Period5 years
DetailsSee www.moxa.com/warranty
Name Type Version Release Date
Datasheet for MiiNePort E2 Series Datasheet V1.4 27 April 2020

Notice: Undefined variable: rs5 in /opt/lampp/htdocs/english/productview.php on line 609

Notice: Trying to get property 'tab_ap' of non-object in /opt/lampp/htdocs/english/productview.php on line 609


Notice: Undefined variable: title_ap in /opt/lampp/htdocs/english/productview.php on line 614


Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/english/productview.php on line 615

PT AUTOMATION (THAILAND) CO.,LTD.

Monday - Friday : office hours 9.00 AM – 6.00 PM

EN
TH