Login   |   (0)   |  

TEL. & FAX +66(0)2-020-3301

IEX-402 Series

Home  >   MOXA  >   Industrial Network Infrastructure  >  
Ethernet Switches  >   Ethernet Extenders

Industrial managed VDSL2/SHDSL Ethernet extenders

Product Feature

  • Automatic CO/CPE negotiation reduces configuration time
  • Link Fault Pass-Through (LFPT) support and interoperable with Turbo Ring and Turbo Chain
  • LED indicators to simplify troubleshooting
  • Easy network management by web browser, Telnet/serial console, Windows utility, ABC-01, and MXview

Introduction

The IEX-402 is an entry-level industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on the G.SHDSL or VDSL2 standard. The device supports data rates of up to 15.3 Mbps and a long transmission distance of up to 8 km for G.SHDSL connection; for VDSL2 connections, the data rate supports up to 100 Mbps and a long transmission distance of up to 3 km.

The IEX-402 Series is designed for use in harsh environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications.

To simplify configuration, the IEX-402 uses CO/CPE auto-negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. In addition, advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick troubleshooting.

 

Additional Features and Benefits

  • Standard G.SHDSL data rate up to 5.7 Mbps, with up to 8 km transmission distance (performance varies by cable quality)
  • Moxa proprietary Turbo Speed connections up to 15.3 Mbps
  • Supports Link Fault Pass-Through (LFP) and Line-swap fast recovery
  • Supports SNMP v1/v2c/v3 for different levels of network management
  • Interoperable with Turbo Ring and Turbo Chain network redundancy
  • Support Modbus TCP protocol for device management and monitoring
  • Compatible with EtherNet/IP and PROFINET protocols for transparent transmission
  • IPv6 Ready

Ethernet Interface

 10/100BaseT(X) Ports (RJ45
connector)
 1
Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection
 Combo Port, RJ-11 (RJ45
connector) or Detachable 2-
Contact Terminal Block
 1
StandardsIEEE 802.1p for Class of Service
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for flow control
IEX-402-VDSL2 Series: ITU G.993.2
IEX-402-SHDSL Series: ITU-T G.991.2

Ethernet Software Features

 ManagementSNMPv1/v2c/v3, Modbus TCP, Back Pressure Flow Control, DHCP Client,
HTTP, LLDP, Syslog, Telnet, TFTP
 MIB MIB-II
 Time Management SNTP

Switch Properties

 MAC Table Size 1 K
 Packet Buffer Size 512 kbits

LED Interface

 LED Indicators PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (TP port)

Serial Interface

 Console Port RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1)

DIP Switch Configuration

 Ethernet InterfaceAll models: CO/CPE, SNR/SPEED

IEX-402-VDSL2 Series: STD/INP
IEX-402-SHDSL Series: ANNEX B/ANNEX A, STD/TURBO

Power Parameters

 Power Connector 2 removable 2-contact terminal block(s)
 Input Voltage 12/24/48 VDC, 9.6 to 60 VDC
 Input CurrentIEX-402-SHDSL Series: 0.388 A @ 12 VDC, 0.196 A @ 24 VDC, 0.097 A
@ 48 VDC
IEX-402-VDSL2 Series: 0.34 A @ 24 VDC
 Overload Current Protection Supported
 Reverse Polarity Protection Supported

Physical Characteristics

 Housing Metal
 IP Rating IP30
 Dimensions 35 x 130 x 105 mm (1.38 x 5.12 x 4.13 in)
 WeightIEX-402-SHDSL Series: 290 g (0.64 lb)
IEX-402-VDSL2 Series: 275 g (0.61 lb)
 Installation DIN-rail mounting, Rack mounting (with optional kit)

Environmental Limits

 Altitude 2000 m
 Operating TemperatureStandard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
 Storage Temperature (package
included)
 -40 to 85°C (-40 to 185°F)
 Ambient Relative Humidity 5 to 95% (non-condensing)

Standards and Certifications

 Safety UL 508
 Hazardous Locations IEX-402-VDSL2 Series: ATEX, Class I Division 2
 EMC EN 55032/24
 EMI CISPR 32, FCC Part 15B Class A
 EMS IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF
 Traffic Control IEX-402-VDSL2 Series: NEMA TS2
 Railway EN 50121-4
 Shock IEC 60068-2-27
 Freefall IEC 60068-2-32
 Vibration IEC 60068-2-6

MTBF

 TimeIEX-402-SHDSL Series: 1,311,455 hrs
IEX-402-VDSL2 Series: 1,498,312 hrs
StandardsTelcordia (Bellcore), GB

Warranty

 Warranty Period 5 years
 Details See www.moxa.com/warranty
Name Type Version Release Date
Datasheet for IEX-402 Series Datasheet V1.2 30 August 2019

Notice: Undefined variable: rs5 in /opt/lampp/htdocs/english/productview.php on line 609

Notice: Trying to get property 'tab_ap' of non-object in /opt/lampp/htdocs/english/productview.php on line 609


Notice: Undefined variable: title_ap in /opt/lampp/htdocs/english/productview.php on line 614


Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/english/productview.php on line 615

PT AUTOMATION (THAILAND) CO.,LTD.

Monday - Friday : office hours 9.00 AM – 6.00 PM

EN
TH