Login   |  
Notice: Undefined index: basket in /opt/lampp/htdocs/english/menutop.php on line 14
(0)   |  

TEL. & FAX +66(0)2-020-3301

MGate 5105-MB-EIP Series

Home  >   MOXA  >   Industrial Edge Connectivity  >  
Protocol Gateways  >   EtherNet/IP Gateways

1-port MQTT-supported Modbus RTU/ASCII/TCP-to-EtherNet/IP gateways

Product Feature

  • Connects fieldbus data to cloud through generic MQTT
  • Supports MQTT connection with built-in device SDKs to Azure/Alibaba Cloud
  • Protocol conversion between Modbus and EtherNet/IP
  • Supports EtherNet/IP Scanner/Adapter
  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Supports MQTT connection with TLS and certificate in JSON and Raw data format
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting and cloud data transmission for cost evaluation and analysis
  • microSD card for configuration backup/duplication and event logs, and data buffering when cloud connection is lost
  • -40 to 75°C wide operating temperature models available
  • Serial port with 2 kV isolation protection
  • Security features based on IEC 62443

Introduction

The MGate 5105-MB-EIP is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and EtherNet/IP network communications with IIoT applications, based on MQTT or third-party cloud services, such as Azure and Alibaba Cloud. To integrate existing Modbus devices onto an EtherNet/IP network, use the MGate 5105-MB-EIP as a Modbus master or slave to collect data and exchange data with EtherNet/IP devices. The latest exchange data will be stored in the gateway as well. The gateway converts stored Modbus data into EtherNet/IP packets so the EtherNet/IP scanner can control or monitor Modbus devices. The MQTT standard with supported cloud solutions on the MGate 5105-MB-EIP leverages advanced security, configuration, and diagnostics to troubleshoot technologies to deliver scalable and extensible solutions that are suitable for remote monitoring applications such as energy management and assets management.

 

Configuration Backup via microSD Card

The MGate 5105-MB-EIP is equipped with a microSD card slot. A microSD card can be used to back up both the system configuration and system log, and can be used to conveniently copy the same configuration to several MGate 5105-MP-EIP units. The configuration file stored in the microSD card will be copied to the MGate itself when the system is rebooted.

 

Effortless Configuration and Troubleshooting via Web Console

The MGate 5105-MB-EIP also provides a web console to make configuration easy without having to install an extra utility. Simply log in as an administrator to access all settings, or as a general user with read-only permission. Besides configuring basic protocol settings, you can use the web console to monitor I/O data values and transfers. In particular, I/O Data Mapping shows data addresses for both protocols in the gateway’s memory, and I/O Data View allows you to track data values for online nodes. Moreover, diagnostics and communication analysis for each protocol can also provide helpful information for troubleshooting.

 

Redundant Power Inputs

The MGate 5105-MB-EIP has dual power inputs for greater reliability. The power inputs allow simultaneous connection to 2 live DC power sources, so that continuous operation is provided even if one power source fails. The higher level of reliability makes these advanced Modbus-to-EtherNet/IP gateways ideal for demanding industrial applications.

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector)2
Auto MDI/MDI-X connection
Magnetic Isolation Protection1.5 kV (built-in)

Ethernet Software Features

Industrial ProtocolsModbus TCP Client (Master), Modbus TCP Server (Slave), EtherNet/IP Scanner, EtherNet/IP Adapter, MQTT
Configuration OptionsWeb Console (HTTP/HTTPS), Device Search Utility (DSU), MGate Manager, Telnet Console
ManagementARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client
MIBRFC1213, RFC1317
Time ManagementNTP Client

Serial Interface

Console PortRS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
No. of Ports1
ConnectorDB9 male
Serial StandardsRS-232/422/485
Baudrate50 bps to 921.6 kbps
Data Bits7, 8
ParityNone, Even, Odd, Space, Mark
Stop Bits1, 2
Flow ControlRTS Toggle (RS-232 only), RTS/CTS
RS-485 Data Direction ControlADDC® (automatic data direction control)
Pull High/Low Resistor for RS-4851 kilo-ohm, 150 kilo-ohms
Terminator for RS-485120 ohms
Isolation2 kV (built-in)

Serial Signals

RS-232TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422Tx+, Tx-, Rx+, Rx-, GND
RS-485-2wData+, Data-, GND
RS-485-4wTx+, Tx-, Rx+, Rx-, GND

Serial Software Features

 
Configuration OptionsSerial Console
Industrial ProtocolsModbus RTU/ASCII Master, Modbus RTU/ASCII Slave

Modbus RTU/ASCII

ModeMaster, Slave
Functions Supported1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Commands100
Input Data Size2048 bytes
Output Data Size2048 bytes

Modbus TCP

ModeClient (Master), Server (Slave)
Functions Supported1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Client Connections16
Max. No. of Server Connections32
Max. No. of Commands100
Input Data Size2048 bytes
Output Data Size2048 bytes

EtherNet/IP

ModeScanner, Adapter
CIP Objects SupportedIdentity, Message Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link, Port
Max. No. of Scanner Connections16 (for read-only), 1 (for read/write)
Max. No. of Adapter Connections100
Input Data Size496 bytes
Output Data Size  496 bytes

MQTT

 Mode Publisher/Subscriber of MQTT, Azure IoT Hub Device, Alibaba IoT Platform Device
 Version Supported v3.1.1
 QoS Level QoS 0,1,2
 Secure Transmission TLS (1.0, 1.1, 1.2) encryption with user's root CA, Client certificate, Private key
 Max. No. of Data Tag 300 data tags
 Max. No. of Message 20 messages
 MQTT General Features Keep Alive, Retain Message, Last Will Message, Clean Session

Memory

 microSD Slot Up to 32 GB (SD 2.0 compatible; Data buffering up to 2 GB)

Power Parameters

 Input Voltage 12 to 48 VDC
 Input Current 455 mA @ 12 VDC
 Power Connector Screw-fastened Euroblock terminal

Relays

 Contact Current Rating Resistive load: 2 A @ 30 VDC

Physical Characteristics

 Housing Metal
 IP Rating IP30
 Dimensions 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)
 Weight 507 g (1.12 lb)

Environmental Limits

 Operating Temperature MGate 5105-MB-EIP: 0 to 60°C (32 to 140°F)
MGate 5105-MB-EIP-T: -40 to 75°C (-40 to 167°F)
 Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
 Ambient Relative Humidity 5 to 95% (non-condensing)

Standards and Certifications

 Safety EN 60950-1, UL 508
 EMC EN 55032/24
 EMI CISPR 32, FCC Part 15B Class B
 EMSIEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF
 Hazardous LocationsATEX, Class I Division 2, IECEx
 Freefall IEC 60068-2-32
 Shock IEC 60068-2-27
 Vibration IEC 60068-2-6, IEC 60068-2-64

MTBF

 Time 859,422 hrs
 Standards Telcordia SR332

Warranty

 Warranty Period 5 years
 Details See www.moxa.com/warranty
Name Type Version Release Date
MGate 5105-MB-EIP Series Datasheet 1.0 22 March 2021

Notice: Undefined variable: rs5 in /opt/lampp/htdocs/english/productview.php on line 609

Notice: Trying to get property 'tab_ap' of non-object in /opt/lampp/htdocs/english/productview.php on line 609


Notice: Undefined variable: title_ap in /opt/lampp/htdocs/english/productview.php on line 614


Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/english/productview.php on line 615

PT AUTOMATION (THAILAND) CO.,LTD.

Monday - Friday : office hours 9.00 AM – 6.00 PM

EN
TH