TEL. & FAX +66(0)2-020-3301
 |
 |
 |
 |
The NPort® 6000 is a terminal server that uses the SSL and SSH protocols to transmit encrypted serial data over Ethernet. Up to 32 serial devices of any type can be connected to the NPort® 6000, using the same IP address. The Ethernet port can be configured for a normal or secure TCP/IP connection. The NPort® 6000 secure device servers are the right choice for applications that use large numbers of serial devices packed into a small space. Security breaches are intolerable and the NPort® 6000 Series ensures data transmission integrity with support for DES, 3DES, and AES encryption algorithms. Serial devices of any type can be connected to the NPort® 6000, and each serial port on the NPort® 6000 can be configured independently for RS-232, RS-422, or RS-485 transmission.
The NPort® 6000 is a reliable device server that provides users with secure serial-to-Ethernet data transmission and a customer-oriented hardware design. If the Ethernet connection fails, the NPort® 6000 will queue all serial data in its internal 64 KB port buffer. When the Ethernet connection is re-established, the NPort® 6000 will immediately release all data in the buffer in the order that it was received. Users can increase the port buffer size by installing an SD card.
The NPort® 6600 has a built-in LCD panel for configuration. The panel displays the server name, serial number, and IP address, and any of the device server’s configuration parameters, such as IP address, netmask, and gateway address, can be updated easily and quickly.
Note: The LCD panel is only available with standard-temperature models.
The NPort® 6600 provides adjustable termination, pull high, and pull low resistors for RS-485 communication. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals, and the pull high and pull low resistors may need adjusting to maintain the integrity of the electrical signal. Since no set of resistor values works for every environment, the NPort® 6600 allows manual adjustment of the resistor values for each serial port using built-in DIP switches.
Memory | |
| SD Slot | Up to 32 GB (SD 2.0 compatible) |
Input/Output Interface | |
| Alarm Contact Channels | Resistive load: 1 A @ 24 VDC |
Ethernet Interface | |
| 10/100BaseT(X) Ports (RJ45 connector) | 1 Auto MDI/MDI-X connection |
| Magnetic Isolation Protection | 1.5 kV (built-in) |
| Optical Fiber | Read more |
Ethernet Software Features | |
| Configuration Options | Web Console (HTTP/HTTPS), Serial Console, Telnet/SSH Console, Windows Utility |
| Management | ARP, BOOTP, DHCP Client, DNS, HTTP, ICMP, IPv4/IPv6, PPPOE, SMTP, SNMPv1/v2c/v3, SNTP, TCP/IP, Telnet, UDP |
| Windows Real COM Drivers | Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded |
| Linux Real TTY Drivers | Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x |
| Fixed TTY Drivers | SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X |
| Android API | Android 3.1.x and later |
| MIB | MIB-II |
| Time Management | SNTP Client |
| Unicast Routing | RIPV1/V2, Static Route |
| Authentication | Local Account Accessibility, RADIUS, TACACS+ |
Serial Interface | |
| Connector | NPort 6600 Series: 8-pin RJ45 NPort 6450 Series: DB9 male |
| No. of Ports | NPort 6450 Series: 4 NPort 6600-8 Series: 8 NPort 6600-16 Series: 16 NPort 6600-32 Series: 32 |
| Serial Standards | NPort 6610 Series: RS-232 NPort 6450/6650 Series: RS-232, RS-422, RS-485 |
| Secure Operation Modes | Reverse SSH, Secure Pair Connection, Secure Real COM, Secure TCP Client, Secure TCP Server, SSH |
| Standard Operation Modes | Disabled, Ethernet Modem, Pair Connection, PPP, Printer, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, Terminal, UDP |
| Baudrate | 50 bps to 921.6 kbps (supports non-standard baudrates) |
| Console Port | NPort 6600 Series: RS-232 (TxD, RxD, GND), 8-pin RJ45 (19200, n, 8, 1) |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS, DTR/DSR, XON/XOFF |
| Pull High/Low Resistor for RS-485 | NPort 6450 / 6650 Series: 1 kilo-ohm, 150 kilo-ohms |
| RS-485 Data Direction Control | NPort 6450 / 6650 Series: Supports |
| Terminator for RS-485 | NPort 6450/6650 Series: 120 ohms |
Serial Signals | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
Power Parameters | |
| Input Current | NPort 6450 Series: 730 mA @ 12 VDC NPort 6600 Series DC Models: 293 mA @ 48 VDC, 200 mA @ 88 VDC AC Models: 140 mA @ 100 VAC (8 ports), 192 mA @ 100 VAC (16 ports), 285 mA @ 100 VAC (32 ports) |
| Input Voltage | NPort 6450 Series: 12 to 48 VDC NPort 6600 Series AC Models: 100 to 240 VAC DC Models: ±48 VDC (20 to 72 VDC, -20 to -72 VDC), 110 VDC (88 to 300 VDC) |
Reliability | |
| Automatic Reboot Trigger | Built-in WDT |
| Alert Tools | Built-in buzzer and RTC (real-time clock) |
Physical Characteristics | |
| Housing | Metal |
| Dimensions (with ears) | NPort 6450 Series: 181 x 103 x 35 mm (7.13 x 4.06 x 1.38 in) NPort 6600 Series: 480 x 195 x 44 mm (18.9 x 7.68 x 1.73 in) |
| Dimensions (without ears) | NPort 6450 Series: 158 x 103 x 35 mm (6.22 x 4.06 x 1.38 in) NPort 6600 Series: 440 x 195 x 44 mm (17.32 x 7.68 x 1.73 in) |
| Weight | NPort 6450 Series: 1,020 g (2.25 lb) NPort 6600-8 Series: 3,460 g (7.63 lb) NPort 6600-16 Series: 3,580 g (7.89 lb) NPort 6600-32 Series: 3,600 g (7.94 lb) |
| Interactive Interface | LCD panel display (non-T models only) Push buttons for configuration (non-T models only) |
| Installation | NPort 6450 Series: Desktop, DIN-rail mounting, Wall mounting NPort 6600 Series: Rack mounting (with optional kit) |
Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 55°C (32 to 131°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature (package included) | Standard/Wide Temp. Models: -40 to 75°C (-40 to 167°F) High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | NPort 6450 Series: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs NPort 6600 Series (except -48V/-HV models): IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power 1 kV; Signal 0.5 kV IEC 61000-4-5 Surge: Power: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs NPort 6600-48V Series: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF NPort 6650-HV Series: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF |
| Safety | UL 60950-1 |
| Traffic Control | NEMA TS2 |
| Vibration | IEC 60068-2-6 |
| Freefall | IEC 60068-2-34 |
Declaration | |
| Green Product | RoHS, CRoHS, WEEE |
MTBF | |
| Time | NPort 6450 Series: 850,905 hrs NPort 6610-8 Series: 135,891 hrs NPort 6610-16 Series: 102,373 hrs NPort 6610-32 Series: 68,707 hrs NPort 6650-8 Series: 636,600 hrs NPort 6650-16 Series: 439,673 hrs NPort 6650-32 Series: 310,078 hrs NPort 6650-8-HV-T: 501,171 hrs NPort 6650-16-HV-T: 380,006 hrs NPort 6650-32-HV-T: 290,914 hrs |
| Standards | NPort 6450 Series: Telcordia (Bellcore) Standard TR/SR NPort 6600 Series: Telcordia (Bellcore) Standard |
Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
| Name | Type | Version | Release Date | |
| Datasheet for NPort 6400/6600 Series | Datasheet | V1.2 | 17 Febuary 2020 |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/english/productview.php on line 615
