3.5” SubCompact Board with Intel® Celeron® J1900 Processor SoC
SYSTEM | |
FORM FACTOR | 3.5" SubCompact Board |
CPU | Intel® Celeron® J1900 Processor SoC |
CPU FREQUENCY | Up to 2.0 GHz |
CHIPSET | Intel® Celeron® J1900 Processor SoC |
MEMORY TYPE | DDR3L 1333MHz SODIMM x 1 |
MAX. MEMORY CAPACITY | Up to 8GB |
BIOS | UEFI |
WAKE ON LAN | Yes |
WATCHDOG TIMER | 255 Levels |
POWER REQUIREMENT | +12V |
POWER SUPPLY TYPE | AT/ ATX Mode |
POWER CONSUMPTION (TYPICAL) | Intel® Celeron® J1900, DDR3L 1600MHz 8G, 1.06A@+12V |
DIMENSION (L X W) | 5.75" x 4" (146mm x 101.7mm) |
OPERATING TEMPERATURE | 32°F ~ 140°F (0°C ~ 60°C) |
STORAGE TEMPERATURE | 40°F ~ 176°F (-40°C ~ 81°C) |
OPERATING HUMIDITY | 0% ~ 90% relative humidity, non-condensing |
MTBF (HOURS) | 204,000 |
CERTIFICATION | CE/FCC |
DISPLAY | |
VGA/LCD CONTROLLER | Intel® Celeron® J1900 Processor SoC |
VIDEO OUTPUT | VGA, LVDS, eDP (optional, support by BOM change) |
BACKLIGHT INVERTER SUPPLY | 18/24-bit dual channel LVDS LCDs |
I/O | |
ETHERNET | RTL8111E, RJ-45 x 2 |
AUDIO | Realtek ALC892 CODEC, MIC-In AMP TI3113, Support 8ohm/4W speaker |
USB PORT | USB2.0 x 9 |
SERIAL PORT | RS-232 x 6 |
PARALLEL PORT | — |
HDD INTERFACE | — |
FDD INTERFACE | — |
SSD | mSATA x 1 (half size) |
EXPANSION SLOT | Mini-Card x 1 (Full-size) |
DIO | — |
SIM | — |
TPM | — |
TOUCH | Reserve USB2.0 x 1 connector to expend |
Name | Type | Version | Release Date |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/productview.php on line 639