The EDS-G308 switches are equipped with 8 Gigabit Ethernet ports and 2 fiber-optic ports, making them ideal for applications that demand high bandwidth. The EDS-G308 switches provide an economical solution for your industrial Gigabit Ethernet connections, and the built-in relay warning function alerts network managers when power failures or port breaks occur. The 4-pin DIP switches can be used for controlling broadcast protection, jumbo frames, and IEEE 802.3az energy saving. In addition, 100/1000 SFP speed switching is ideal for easy on-site configuration for any industrial automation application.
A standard-temperature model, which has an operating temperature range of -10 to 60°C, and a wide-temperature range model, which has an operating temperature range of -40 to 75°C, are available. Both models undergo a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control applications. The switches can be installed easily on a DIN rail or in distribution boxes.
Input/Output Interface | |
Alarm Contact Channels | 1 relay output with current carrying capacity of 1 A @ 24 VDC |
Ethernet Interface | |
10/100/1000BaseT(X) Ports (RJ45 connector) | EDS-G308/G308-T: 8 EDS-G308-2SFP/G308-2SFP-T: 6 All models support: Auto negotiation speed Full/Half duplex mode Auto MDI/MDI-X connection |
Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP+) | EDS-G308-2SFP: 2 EDS-G308-2SFP-T: 2 |
Standards | IEEE 802.3 for 10BaseT IEEE 802.3ab for 1000BaseT(X) IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for flow control IEEE 802.3z for 1000BaseX IEEE 802.3az for Energy-Efficient Ethernet |
DIP Switch Configuration | |
Ethernet Interface | Broadcast storm protection, Jumbo Frame, IEEE 802.3az energy saving, 100/1000 SFP speed switching, Port break alarm |
Switch Properties | |
Jumbo Frame Size | 9.6 KB |
MAC Table Size | 8 K |
Packet Buffer Size | 4 Mbits |
Processing Type | Store and Forward |
Power Parameters | |
Connection | 1 removable 6-contact terminal block(s) |
Input Voltage | 12/24/48 VDC, Redundant dual inputs |
Operating Voltage | 9.6 to 60 VDC |
Reverse Polarity Protection | Supported |
Input Current | EDS-G308: 0.29 A @ 24 VDC EDS-G308-2SFP: 0.31 A @ 24 VDC |
Physical Characteristics | |
Housing | Metal |
IP Rating | IP30 |
Dimensions | 53 x 135 x 105 mm (2.08 x 5.31 x 4.13 in) |
Weight | 880 g (1.94 lb) |
Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Environmental Limits | |
Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature (package included) | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
Freefall | IEC 60068-2-32 |
EMC | EN 55032/24 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF |
Hazardous Locations | ATEX, Class I Division 2 |
Maritime | ABS, DNV-GL, LR, NK |
Railway | EN 50121-4 |
Safety | EN 60950-1, UL 508, EN 60950-1 (LVD) |
Shock | IEC 60068-2-27 |
Vibration | IEC 60068-2-6 |
MTBF | |
Time | 2,424,649 hrs |
Standard | Telcordia (Bellcore), GB |
Warranty | |
Warranty Period | 5 years |
Details | See www.moxa.com/warranty |
Name | Type | Version | Release Date | |
Datasheet for EDS-G308 Series | Datasheet | V1.0 | 12 November 2018 |
10/100/1000BaseT(X) Ports RJ45 Connector | 6 |
Combo Ports 10/100/1000BaseT(X) or 100/1000BaseSFP | 2 |
Operating Temp. | -10 to 60°C |
10/100/1000BaseT(X) Ports RJ45 Connector | 6 |
Combo Ports 10/100/1000BaseT(X) or 100/1000BaseSFP | 2 |
Operating Temp. | -40 to 75°C |
10/100/1000BaseT(X) Ports RJ45 Connector | 8 |
Combo Ports 10/100/1000BaseT(X) or 100/1000BaseSFP | - |
Operating Temp. | -10 to 60°C |
10/100/1000BaseT(X) Ports RJ45 Connector | 8 |
Combo Ports 10/100/1000BaseT(X) or 100/1000BaseSFP | - |
Operating Temp. | -40 to 75°C |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/productview.php on line 639