TEL. & FAX +66(2)077-6989

mSATA 3SE-P

Home  >   Innodisk  >   Flash Storage  >  
mSATA

Innodisk mSATA 3SE-P is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance.

Product Feature

  • SATA 6Gb/S interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Great I.O.P.S for best system reaction
  • Build-in Dram buffer
  • Zero mechanical interference
  • Anti-vibration mechanical design
  • JEDEC standard MO-300 dimension

Innodisk mSATA 3SE-P is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the MO-300 specification which established by JEDEC. Regarding of mechanical interference, Innodisk mSATA 3SE-P absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk mSATA 3SE-P effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Model NamemSATA 3SE-P
InterfaceSATA III 6.0 Gb/s
Flash TypeSLC
TypeStandard
Capacity4GB~64GB
Sequential R/W (MB/sec, max.)470/250
Max. Power Consumption1.2 W (3.3V x 360 mA )
Max. Channels4
Thermal SensorOptional
H/W Write ProtectN
S.M.A.R.T.Y
ATA SecurityY
Dimension (WxLxH/mm)29.8 x 50.8 x 3.4
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Storage Temperature-55°C ~ +95°C
Operation TemperatureStandard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C
Name Type Version Release Date
mSATA_3SE-P_Datasheet Datasheet V1.0 19 October 2020

บริษัท พีที ออโตเมชั่น (ไทยแลนด์) จำกัด

จันทร์ ถึง ศุกร์ เวลา 9.00 น. – 18.00 น.

EN
TH