TEL. & FAX +66(2)077-6989

DRP024V060W1AA

Home  >   Delta PSU  >   DIN Rail Power Supply  >  
CliQ

DIN Rail CliQ Series

Product Feature

  • Universal AC input voltage range
  • Power will not de-rate for the entire input voltage range
  • Power Boost of 150% for 3 seconds
  • Full corrosion resistant aluminium casing
  • SEMI F47 certified
  • Conforms to harmonic current IEC/EN 61000-3-2, Class A
  • Conform coating on PCBAs to protect against common dust and chemical pollutants
  • Hazardous Locations approval to ATEX and Class I, Div 2
  • Certified according to IEC/EN/UL 62368-1

Output Voltage

 

24V

Output Power

 

60W

Output Current

 

2.5A

Input Voltage Range

 

85-264Vac

Dimensions (L x W x D)

 

121 x 32 x 120 mm

4.76” x 1.26” x 4.72”

Unit Weight

 

0.37 kg (0.82 lb)

Output Current

2.5A

Output Voltage

24V

Output Voltage Adjustment Range

22-28Vdc

Output Power

60W

Line Regulation

< 0.5% (@ 85-264Vac input, 100% load)

Load Regulation

< 1% (@ 85-264Vac input, 0-100% load)

PARD

< 240mVpp

Start-up Time

< 3000ms @ nominal input (100% load)

Hold-up Time

> 20ms @ 115Vac,
> 125ms @ 230Vac (100% load)

Dynamic Response (Overshoot & Undershoot O/P Voltage)

± 5% @ 85-264Vac input, 10-100% load
(Slew Rate: 0.1A/μs, 50% duty cycle @ 5Hz to 1KHz)

Start-up with Capacitive Loads

8,000µF Max

Rise Time

< 100ms @ nominal input (100% load)

Input Voltage

100-240Vac

Input Voltage Range

85-264Vac

Nominal Input Frequency

50-60Hz

Input Frequency Range

47-63Hz

DC Input Voltage Range

120-375Vdc

Input Current

< 1.10A @ 115Vac,
< 0.70A @ 230Vac

Efficiency at 100% load

> 86.0% @ 115Vac,
> 87.0% @ 230Vac

Max Inrush Current

< 40A @ 115Vac,
< 80A @ 230Vac

Leakage Current

< 1mA @ 240Vac

Max Power Dissipation

0% load: < 1.1W @ 115Vac, < 1.6W @ 230Vac
100% load: < 9.7W @ 115Vac, < 8.9W @ 230Vac

Case Chassis / Cover

Aluminium

 

Indicator

Green LED (DC OK)

 

Cooling System

Convection

 

Input Terminal

3 Pins (Rated 300V/20A)

 

Output Terminal

2 Pins (Rated 300V/20A)

 

Noise Sound Pressure Level (SPL)

< 40dBA

 

Mounting Rail

Standard TS35 DIN Rail in accordance with EN 60715

 

Wire

Input / Output: AWG 20-14

 

Unit Weight

0.37 kg (0.82 lb)

Dimensions

121 x 32 x 120 mm
4.76” x 1.26” x 4.72”

Operating Temperature

-20°C to +80°C

Storage Temperature

-25°C to +85°C

Power De-rating

Vertical: < 0°C de-rate power by 1% / °C, > 50°C de-rate power by 2.5% /°C
Horizontal: < 0°C de-rate power by 1% / °C, > 50°C de-rate power by 2.5% / °C, > 70°C de-rate power by 4% / °C

Operating Humidity

5 to 95% RH (Non-Condensing)

Shock Test (Non-Operating)

IEC 60068-2-27, 30G (300m/S²) for a duration of 18ms, 3 times per direction, 18 times in total

Vibration (Non-Operating)

IEC 60068-2-6, 10Hz to 150Hz @ 50m/S² (5G peak); 90 min per axis for all X, Y, Z direction

Operating Altitude

0 to 2,000 Meters (6,560 ft)

Pollution Degree

2

Over Voltage Category

III
According to IEC/EN 62477-1 (clearance and creepage distances)

Overvoltage

32V ±10%, SELV Output, Hiccup Mode, Non-Latching (Auto-Recovery)

Overload / Overcurrent

> 150% of rated load current, Hiccup Mode, Non-Latching (Auto-Recovery)

Over Temperature

< 80°C Surrounding Air Temperature @ 100% load, Non-Latching (Auto-Recovery)

Short Circuit

Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)

Protection Against Shock

Class I with Primary Earth connection

MTBF

> 500,000 hrs. as per Telcordia SR-332 (I/P: 115Vac, O/P: 100% load, Ta: 25°C)

Expected Cap Life Time

10 years (115Vac & 230Vac, 50% load @ 40°C)

Electrical Safety

SIQ Bauart: EN 60950-1, EN 62368-1
UL/cUL recognized: UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395), UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395)
CSA: CSA C22.2 No. 60950-1 and UL 60950-1 (File No. 181564)
CB scheme: IEC 60950-1, IEC 62368-1

CE

In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU

In conformance with Equipment for explosive atmospheres (ATEX) directive 2014/34/EU

Galvanic Isolation

Input to Output: 4.0KVac
Input to Ground: 1.5Kvac
Output to Ground: 1.5KVac

Industrial Control Equipment

UL/cUL listed: UL 508 and CSA C22.2 No. 107.1-01 (File No. E315355)
CSA: CSA C22.2 No. 107.1-01 (File No. 181564)

Hazardous Location / ATEX

cCSAus: CSA C22.2 No. 213-M1987 and ANSI / ISA 12.12.01:2007 [Class I, Division 2, Group A, B, C, D T4, Ta= -20°C to +80°C (> +50°C derating)]

ATEX: EN 60079-0:2009, EN 60079-15:2010 [II 3G Ex nA IIC T4 Gc, Ta= -20°C to +80°C (> +50°C derating)]
Certificate No. EPS 09 ATEX 1 215 X

Electrical Equipment for Use in Electrical Power Installations

IEC/EN 62477-1

Safety Entry Low Voltage

SELV (EN 60950-1)

Emission

(CE & RE)
Generic Standards: CISPR 32, EN 55032, EN 55011, FCC Title 47: Class B

Immunity

Generic Standards: EN 55024

Harmonic Current Emissions

IEC/EN 61000-3-2, Class A

Voltage Fluctuation and Flicker

IEC/EN 61000-3-3

Name Type Version Release Date
DRP024V060W1AA Datasheet 1.0 27 January 2021
DRP024V060W1AA Manual 1.0 27 January 2021

บริษัท พีที ออโตเมชั่น (ไทยแลนด์) จำกัด

จันทร์ ถึง ศุกร์ เวลา 9.00 น. – 18.00 น.

EN
TH