Digital video/audio switch and extender to drive up to four remote displays
Product Feature
ADDERLink DV104T is a high performance digital video extender and splitter that enables you to locate your critical play out hardware in a secure and temperature controlled environment away from the display point environment whilst maintaining the same user experience.
Proof of Display (P.O.D.)
50 meter extension distance
Plug and Play
Two video inputs, four video outputs
2x4 HD Digital matrix
Line powered receivers
ADDERLink DV104T is a high performance digital video extender and splitter that enables you to locate your critical play out hardware in a secure and temperature controlled environment away from the display point environment whilst maintaining the same user experience.
Proof of Display (P.O.D.)
50 meter extension distance
Plug and Play
Two video input, four video output
2x4 HD Digital matrix
Line powered receivers
Hardware compatibility
All computers with HDMI connections - requirement dependent
HDMI interface
The system supports resolutions such as 480p, 720p, 1080P or WUXGA (1920x1200) @60Hz and 24 bit color depth. Does not support HDCP
Software compatibility
All known operating systems.
Audio
The system delivers eight channels of HDMI audio with sample sizes of 16, 20 or 24 bit at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz.
Connections
2 x HDMI type A male, 4 x CATx sockets for link outputs,1 x 10/100Base-TX network port (config), 1 x 9-way D-sub RS232C port, 2.5mm DC power jack
Operating temperature
0 to 40ºC / 32 to 104ºF
Physical design
3pin Toby jack (power adapter included),100-240VAC 50/60Hz, 0.8A, input to power adapter. 12VDC 18W output from power adapter
Approvals
CE, FCC
Resolution
Frequency
Patch Connections
Cable Type
Distance
1920x1200
60Hz
0
CAT7a
50 meters
1920x1200
60Hz
0
CAT6a (shielded)
50 meters
1920x1200
60Hz
2
CAT6a (shielded)
40 meters
1920x1200
60Hz
2
CAT7a
40 meters
Note: Distances are achieved using single lengths of trunk/bulk cable. For each break/patch connection reduce distance by 5 meters. Preferably patch cables should be of type CAT7a and less than 2 meters. Patch cables over 2 meters must be CAT7a.
