TEL. & FAX +66(0)2-020-3301
 |
 |
 |
The NanoCOM-APL is built around a 6th Generation Intel® Atom™, Celeron®, or Pentium® processor and features onboard LPDDR4 memory with a capacity of up to 8GB. The 7W module’s low power-consumption architecture means it can be used at the heart of hand-held, battery-powered devices and fully enclosed IP67 applications.
Combined with an FPGA controller and an AI chip, the NanoCOM-APL is being used as the centerpiece of advanced machine vision systems that scan products to create 3D images that can be checked for faults. Because of its size and industrial operating temperature range, these systems can be used on a production line or even on a robotic arm.
The module also features 1GbE LAN connections, optional onboard eMMC storage of up to 64Gb, a PCIe x4 expansion slot, an LVDS, DDI, or eDP connections, and support for up to eight USB3.0 and two USB2.0 ports.
| SYSTEM | |
| FORM FACTOR | COM Express, Mini size, Pin-out Type 10 |
| CPU | Onboard 6th Generation Intel® Atom™/Celeron®/Pentium® SoC |
| CPU FREQUENCY | E39xx series, N4xxx series |
| CHIPSET | Intel® Atom™/Celeron® Processor SoC |
| MEMORY TYPE | Onboard LPDDR4 |
| MAX. MEMORY CAPACITY | 8GB LPDDR4 Onboard |
| BIOS | SPI type |
| WAKE ON LAN | Yes |
| WATCHDOG TIMER | 255 Levels |
| POWER REQUIREMENT | Standard : +12V, AT/ATX (Optional: +5V, AT/ATX) |
| POWER SUPPLY TYPE | AT/ATX |
| POWER CONSUMPTION (TYPICAL) | Up to E3950 TDP 12W CPU |
| DIMENSION (L X W) | 3.31" x 2.17" (84mm x 55mm) |
| OPERATING TEMPERATURE | 32 °F ~ 140 °F (0 °C ~ 60 °C) -40 °F ~ 185 °F (-40 °C ~ 80 °C) |
| STORAGE TEMPERATURE | -40°F ~ 176°F (-40°C ~ 80°C) |
| OPERATING HUMIDITY | 0% ~ 90% relative humidity, non-condensing |
| MTBF (HOURS) | 80,000 |
| CERTIFICATION | CE/FCC |
| DISPLAY | |
| DISPLAY CONTROLLER | Intel® HD Graphic |
| VIDEO OUTPUT | LVDS LCD/eDP, DDI x 1 |
| LVDS INTERFACE | Supports 18-bit and 24-bit Single channel |
| I/O | |
| ETHERNET | Intel® I210IT |
| AUDIO | High Definition Audio Interface |
| USB SUPPORT | USB 2.0 x 8, USB 3.2 Gen 1 x 2 |
| SERIAL PORT | TX/RX x 2 |
| HDD INTERFACE | SATA 3 x 2 |
| ONBOARD STORAGE | Optional onboard eMMC |
| EXPANSION SLOT | PCIe [x1] x 4 (up to 3 devices) LPC SMBus I2C |
| GPIO | GPIO 8-bit |
| TPM | — |
| Name | Type | Version | Release Date | |
| NANOCOM-APL Datasheet | Datasheet | V1.0 | 06 June 2020 |
Notice: Undefined variable: detail_ap in /opt/lampp/htdocs/productview.php on line 639
