ZeroU™ IP-based high performance KVM for extension/matrix of video, audio and USB over a single cable
Product Feature
ZeroU™ size: The ADDERLink™ INFINITY 100T (ALIF100T) takes ZeroU™ of rack space in the server room allowing for ultimate flexibility and ease of installation
IP-based: Use your existing networking infrastructure to extend or matrix your computing resources to your users
USB powered: The device can be powered from USB. This means there is no need to provision for an external PSU. Options for powering from an external PSU or redundant PSU are also available
Low power consumption: Requiring less than 3 Watts, the unit can be powered from USB. This means it could use less than a quarter of the energy when compared to other solutions
Multiple video options: The system supports resolutions to a maximum of 1920x1200 @60Hz through either DVI, DisplayPort™ and VGA interfaces.
USB 1.1: Enables you to connect any USB human interface device from mouse and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers
Seamless integration with the ADDERLink™INFINITY range: The ALIF100T can integrate seamlessly into your existing ADDERLink™ INFINITY setup, replacing or working in conjunction with your existing ALIF endpoints
Perfect digital video: The ALIF100T uses an encoding system that is spatially-lossless, with 1:1 pixel mapping, so the digital video you receive is the same as the digital video leaving the remote computer ensuring the very best picture available and colour accuracy
USB audio: The system delivers USB stereo audio (Line In, Line Out) digitally across the network
EDID management: The system has intelligent EDID management to either allow the true characteristics of the monitor to be passed back to the computer, or controlled resolutions to be imposed
Digital KVM matrix: By the addition of ADDERLink INFINITY Management system (AIM) you can turn multiple point to point extenders into a matrix system that allows any workstation to connect to any computer connected to the network. See the AIM page on the Adder website for details
ADDERLink™ INFINITY 100T (ALIF100T) is a ZeroU™, high performance IP KVM (Keyboard, Video, Mouse) extender and/or matrix that enables the use of standard IT infrastructure to extend computers away from the user environment.
Zero U form factor
IP-based: use your existing network
USB powered
Low power consumption
Supports multiple video resolutions
Easy retrofit into existing infrastructure
Plug and play
Note: If using with an AIM Manager, the AIM must be running firmware version 4.7 or above
Operating/storage conditions
Operating temperature: 0 to 50ºC / 32 to 122ºF Storage temperature: -10 to 60ºC / 14 to 140ºF Storage and operating relative humidity: 10-90% non-condensing Altitude: < 3000m MTBF: >500,000 hours
Power
USB power: 2 x USB2.0 (2x 500mA @5V) 5W External power: 5VDC, 1A, (LPS) Typical power consumption: 3W BTU: 10.2BTU/hr
Physical
Dimensions: (L)110mm /4.3” x (W)55mm/2.17” x (D)25mm/1” with 30cm/12” cable length Weight: 0.2kg /0.4 lb Materials: ABS and aluminium construction
Connectors Computer: DVI-D, DisplayPort™, or VGA Ethernet: 1 x 8p8c (RJ45) Power: 2.5mm socket 2x USB Type-A
Specification
USB: USB1.1 full and low speed (No HS support) USB features: Keyboard, mouse and touch USB device seen as: 7 or 13 port hub Max video resolution: Up to 1920x1200 @60Hz Audio: Line in/out USB audio 2 channel 16bit 48KHz DisplayPort™ Audio: None Ethernet: 1GbE (No 10/100 support) DisplayPort™ version requires source to be DisplayPort™ Dual-Mode (DP++) compliant
