A single link, single head digital video and USB2.0 fanless KVM extender that runs over a single cable using your standard IP network
Product Feature
Perfect digital video: uncompressed video extension and pixel perfect digital video up to 24 bits per color at a maximum of 1920x1200 single link or single head with real time control
Digital Stereo Audio: digitally delivered crystal clear audio across the network
Distribution: of DVI-D, USB, audio and bidirectional RS232 across up to 10km
Power redundancy: the units can detect whether the network is in operation and will utilize the second network port is failure detected
EDID management: Extended Display Identification Data (EDID) enables the remote system to exactly mirror the date coming from the source monitor
Plug and Play: the ADDERLink INFINITY range is delivered in a zero config state so they work as soon as they are connected, without the need for drivers or software
Robust yet lightweight: small form factor, rack mountable device
USB True Emulation: USB 2.0 enables connection to any USB human interface device from mice and keyboards through to graphics tablets, jog shuttles, joysticks and 3D explorers
As part of the ADDERLink™ INFINITY range, ADDERLink INFINITY 1002 is a high performance KVM extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment, isolated from the user work station. Configurable as a single head or single link, this extender provides pixel perfect video with minimal lag across a distance of up to 10km. This KVM extender can be used as a point-to-point extender, or integrated into a wider matrix system when combined with the ADDERLink INFINITY Manager (AIM).
‘At-the-PC’ experience: single link or single head, 24 bits per color at a maximum resolution of 1920 x 1200 at 60Hz with minimal lag
Adaptable to suit your needs: delivers uncompressed digital video with audio, and option to compress video to minimize bandwidth usage over copper or fiber
IP-based: standard IP protocols, ensuring maximum compatibility with your existing IT infrastructure and staff skillset
Flexible solution: from point-to-point extender to an infinitely extensible matrix
In-built security measures: compliant with universal enterprise grade security standards (AES 256 bit encryption and RSA 2048 bit public key authentication)
Approvals / Compliance
CE
FCC
Video Resolutions
The system supports either single link or single head DVI resolutions to a maximum of 1920 x 1200@ 60Hz
Audio
The system delivers analogue stereo audio (Line in, Line Out) via digital signalling between any transmitter/receiver pair.
Audio output of any transmitter can be multicast to many receivers.
Standards
Supports USB2.0 devices (Low, Full and High speed). The system has a security feature, which allows the blocking of non-HID devices. Isochronous devices are not supported (i.e. USB audio or video devices).
Cable Requirements
CATx (up to 100m/330ft) or fiber (requirements dependent)
Environmental
0 to 40ºC / 32 to 104ºF
Connectors – Local Unit
1 x DVI-D, audio 3.5mm in, audio 3.5mm out, USB type B, RS232 9-pin D-type. 1 x 8p8c and 1 x SFP for ADDERLink INFINITY network connections.
Connectors – Remote Unit
1 x DVI-D, audio 3.5mm in, audio 3.5mm out, 4 x USB type A, RS232 9-pin D-type. 1 x 8p8c and 1 x SFP for ADDERLink Infinity network connections.
